Heat Pumps & Heat Pump Technology

Heat Pumps - Our Product Range & The Benefits

Call 0114 270 3900 to Discuss your Heat Pump Requirements

Heat Pump technology involves equipment which transfers energy (heat) from one location (an open space) to another (a heat sink). Heat pump technology uses the refrigeration process (is applied by transferring) and transfers low temperature energy to a refrigeration loop, compresses the gases (heat) to a high temperature and transfers this heat to the hot water and heating distribution system(device called a heat sink). No matter how large or small the building, we will have a heat pump system to meet your needs. Our systems range from 6kW to 160kW and systems in excess of 250kW. Domestic hot water storage is also provided using 180 to 1000 litre pressurised vessels designed specifically for our Heat Pumps.

Key Benefits

No need for an oil or gas boiler!
Provides all of your heating and hot water needs.
One year parts and labour warranty.
Can be monitored over the internet for user confidence and security.
Mains pressure hot water cylinders from 180 litres to 1000 litres.
Considerable savings in energy bills compared to conventional systems.
For every 1 unit of electricity used, up to 4 units of heat are produced.
Change to 20+ years system lifetime and no scheduled maintenance.
Quality Assured units from Swedish manufacturers with over 30 years of design and operational
experience.
Inflation and tax proof investment, the government cannot tax your garden!
No risk of explosion or carbon monoxide poisoning.
No need for gas connections or fuel tanks.
Use under floor heating, radiators fan coils or a combination.
Will heat swimming pools.
Energy efficiency average 400% across the year compared to boilers that are typically 70 - 95%. They also maintain their efficiency over time whereas boiler efficiencies reduce dramatically over time.
Cost effective passive and active cooling available.
Always available whatever the weather, day or night.

Heat Collection Methods

Depending on your project, a number of options for heat collection are available.

Horizontal Closed Ground Loops: When there is plenty of land available this is normally the most cost effective method. Polyethylene pipe is laid in trenches approximately 1m deep and a mixture of water and food grade anti-freeze ('brine') is circulated to collect energy from the ground.

Vertical Closed Ground Loops: Where space is tight, vertical boreholes may be the answer. They can range from 25m - 150m deep but can be expensive depending on the location. A closed U-tube is placed in the borehole and a mixture of water and anti-freeze is circulated to collect energy.

Air Source System: This harnesses solar energy found in the outdoor air. With this system there is no need for digging or drilling and installation is very quick and simple. It is ideal for urban sites where there is very little ground space.

Vertical Open Loops: This type of loop system may be cost-effective if ground water is plentiful. Ground water from an aquifer is pumped to a heat exchanger then transfers its heat to the heat pump. After it leaves the building, the water is pumped back into the same aquifer via a second well, called a discharge well, located at a suitable distance from the first.

Closed Pond Loops: This type of loop design may be the most economical if your building is near a body of water such as a large pond or lake. The brine circulates underwater through polyethylene piping in a closed system. The pipes may be coiled in a slinky shape to fit more of it into a given amount of space. Because it's a closed system, there are no adverse impacts on the aquatic system.

Danfoss Heat Pumps Product Range

1. Danfoss Heat Pump - DHP-A Click to view details

Air/water heat pump that provides heating and hot water.

Danfoss DHP-A is an air/water heat pump that usesnew innovative technology to operate at the highest possible annual efficiency meaning you can save more on fuel bills and CO2 emissions.

The integrated hot water tank incorporates our patented TWS* technology, producing hot water faster and at higher temperatures than with traditional technology.

Defrosting is done automatically only on demand which further boosts efficiency. DHP-A operates at a low sound level and can be controlled and monitored via the Internet. The controller is advanced but very user friendly.

TWS = *Tap Water Stratificator, our patented technology developed to stratify hot water in a tank to ensure that heat is used optimally.

2. Danfoss Heat Pump - DHP-A Opti Click to view details

Air/water heat pump with optimised speed control to increase savings.

Danfoss DHP-A Opti is an air/water heat pump that uses new innovative technology to operate at the highest possible annual efficiency, meaning you can save more on fuel bills and CO2 emissions.

The new Opti technology incorporates an intelligent control system that via speed controlled circulation pumps ensures that the performance is always adjusted to the prevailing requirements and conditions of the heating system. This makes the heat pump always work under the most ideal conditions available, guaranteeing maximum efficiency, second by second, hour by hour.

The integrated hot water tank incorporates our patented TWS* technology, producing hot water faster and at higher temperatures than with traditional technology. This heat pump operates at a low sound level and can be controlled and monitored via the Internet.

3. Danfoss Heat Pump - DHP-AL Click to view details

Air/water heat pump that provides heating and hot water.

Danfoss DHP-AL is an air/water heat pump that uses new innovative technology to operate at the highest possible annual efficiency meaning you can save more on fuel bills and CO2 emissions.

DHP-AL has a separate hot water tank, ideal if you have a low ceiling. The tank incorporates our patented TWS* technology, which produces hot water faster and at higher temperatures than with traditional technologies.

Defrosting is done automatically only on demand which further boosts efficiency.

DHP-AL operates at a low sound level and can be controlled and monitored via the Internet. The controller is advanced but very user friendly.

4. Danfoss Heat Pump - DHP-AL Opti Click to view details

Air/water heat pump with optimised speed control to increase savings.

Danfoss DHP-AL Opti is an air/water heat pump that uses new innovative technology to operate at the highest possible annual efficiency, meaning you can save more on fuel bills and CO2 emissions.

The new Opti technology incorporates an intelligent control system that via speed controlled circulation pumps ensures that the performance is always adjusted to the prevailing requirements and conditions of the heating system.

This makes the heat pump always work under the most ideal conditions available, guaranteeing maximum efficiency, second by second, hour by hour.

DHP-AL Opti has a separate hot water tank, ideal if you have a low ceiling. The tank incorporates our patented TWS* technology, which produces hot water faster and at higher temperatures than with traditional technologies. This heat pump operates at a low sound levels and it can be controlled and monitored via the Internet.

5. Danfoss Heat Pump - DHP-AX Click to view details

Our most flexible and affordable air source heat pump ever.

Reduce your heating costs with our most affordable heat pump ever. In the DHP-AX we have used our accumulated heating knowledge to develop a flexible air/water heat pump that operates at high performance. Energy is taken from outdoor air, even down to temperatures as low as �16°C.

DHP-AX can be combined with an existing heating system, or parts of it, for example a water tank. If you need a complete solution, you can easily supplement DHP-AX with the parts you need � your installer can offer a specially adapted indoor kit to obtain maximum efficiency.

The flexible DHP-AX will suit your needs, however big or small they are, and you�ll never invest in more than you need.

The DHP-AX consists of only two major units, the outdoor heat pump and the indoor control unit, which makes installation quick and smooth. And since the compressor is located on the outside there are no components that can create noise on the inside.

6. Danfoss Heat Pump - DHP-H Click to view details

Efficient and sustainable.

Danfoss DHP-H uses new innovative technology to operate at the highest possible annual efficiency. It takes energy from the ground, bedrock or water and converts it to temperatures perfect for heating and hot water for your home. It operates so efficiently that you can cut your heating costs and carbon emissions significantly.

The integrated hot water tank (180 l) incorporates our patented TWS* technology, producing hot water faster and at higher temperatures than with traditional technology.

The DHP-H operates at a low sound level and it can easily be adapted to produce cost effective cooling. You can control and monitor DHP-H via the Internet and the controller is advanced but very user friendly.

7. Danfoss Heat Pump - DHP-H Opti Click to view details

A cost effective heat pump providing an unbeatable level of comfort.

Danfoss DHP-H Opti Pro uses new innovative technology to operate at the highest possible annual efficiency saving you more on fuel bills and CO2 emissions.

The new Opti technology incorporates an intelligent control system that via speed controlled circulation pumps ensures that the performance is always adjusted to the prevailing requirements and conditions of the heating system. This makes the heat pump always work under the most ideal conditions available, guaranteeing maximum efficiency, second by second, hour by hour.

DHP-H Opti Pro produces large amounts of hot water whilst using a minimum of energy. This is made possible by our two patented technologies, HGW* and TWS**. This heat pump operates at a low sound level and it can easily be adapted to produce cost effective cooling. You can control and monitor DHP-H Opti Pro via the Internet.

8. Danfoss Heat Pump - DHP-L, DWH Click to view details

DHP-L - Efficient and sustainable.

DWH - Advanced domestic hot water storage.

Danfoss DHP-L uses new innovative technology to operate at the highest possible annual efficiency. It takes energy from the ground, bedrock or water and converts it to temperatures perfect for heating and hot water for your home. It operates so efficiently that you can cut your heating costs and carbon emissions significantly.

DHP-L has a separate hot water tank, DWH (optional), ideal if you have a low ceiling or a high hot water demand. Danfoss DWH is available in different sizes. The tank incorporates our patented TWS* technology which produces hot water faster and at higher temperatures than with traditional technologies. You can also connect DHP-L to your existing hot water tank.

This heat pump operates at a low sound level and it can easily be adapted to produce cost effective cooling. You can control and monitor DHP-L via the Internet and the controller is advanced but very user friendly.

9. Danfoss Heat Pump - DHP-L Opti Click to view details

DHP-L Opti - Minimum energy consumption thanks to optimised speed control.

DWH - Advanced domestic hot water storage.

Danfoss DHP-L Opti uses new innovative technology to operate at the highest possible annual efficiency saving you more on fuel bills and CO2 emissions.

The new Opti technology incorporates an intelligent control system that via speed controlled circulation pumps ensures that the performance is always adjusted to the prevailing requirements and conditions of the heating system. This makes the heat pump always work under the most ideal conditions available, guaranteeing maximum efficiency, second by second, hour by hour.

DHP-L Opti has a separate hot water tank, DWH (optional), ideal if you have a low ceiling or a high hot water demand. Danfoss DWH is available in different sizes. The tank incorporates our patented TWS* technology. You can also connect DHP-L Opti to your existing hot water tank.

This heat pump operates at a low sound level and it can easily be adapted to produce cost effective cooling. You can also control and monitor DHP-L Opti via the Internet.

10. Danfoss Heat Pump - DHP-R Click to view details

Intelligent solution for larger buildings.

Danfoss DHP-R is a large capacity heat pump with capacities between 20kW and 42kW. Up to eight heat pumps can be combined for even higher requirements (connected in cascade). Energy is extracted from the ground, rock or water. DHP-R can be supplemented to also produce cooling.

DHP-R can be integrated to existing heating systems, such as an oil-fired boiler, electric boiler, district heating or wood, which then can supply extra energy for peak demands. The intelligent control monitors the entire heating installation.

DHP-R can be controlled and monitored via the Internet.

Perfect for those who have several buildings or want to control the system from a distance.

lease browse our website for more information about Danfoss Heat Pumps and our range of Heat Pumps then contact us on 0114 270 3900 to speak to one of our team or complete the enquiry form on the website.

>	Danfoss Heat Pumps UK Limited Unit 3 Parkwood Business Park Parkwood Sheffield South Yorkshire S3 8AL Tel: 0114 270 3900 Fax: 0114 275 1398 www.ecoheatpumps.co.uk
>	Danfoss Heat Pumps Scotland Algo Business Centre Glenearn Road Perth Perthshire PH2 0NJ Tel: 01738 450473 Fax: 01738 450474
>	Danfoss Heat Pumps South West Victoria Commercial Centre Station Approach Victoria Roche Cornwall PL26 8LG Tel: 0114 270 3900